METRON charging station Type 1 Schuko 16A 1ph 6m with case

  • Intro
  • METRON charging station Type 1 Schuko 16A 1ph 6m with case
  • METRON charging station Type 1 Schuko 16A 1ph 6m with case

PC 01

  • ALL-IN-A PLUG design – NO bulky box on the cable
  • 100% in-house developed miniature FULL feature vehicle communication module (Micro EVSE 1)
  • Designed for 1-phase Mode 2 EV charging with currents up to 16A
  • ADJUSTABLE CHARGING CURRENT (from 6A to 16A)
  • Optional over-temperature protection with SOFT-OFF capability and automatic reset
  • PREMIUM quality EV cable used (LAPP KABEL – Made in Germany)
  • Choose preferred plug type (wall socket/grid side)
  • Lenght 6m
  • RAINPROOF – covered with special coating
  • Durable Carrier Case included
  • Resistant to microbes, oil, dust and water
  • Special cable design for long service life
  • Flexible at low temperatures (temp. range: -25°C to +80°C)
  • Withstands high mechanical stress, in particular abrasion and sliding demands
  • Plug Type (EV Side): Type 1 (SAE J1772) Female Plug
  • Plug Type (wall socket/grid side): (Schuko – Type F)
  • Max. Charging Current: 16A (single phase)
  • Charging current can be adjusted: 6A, 8A, 10A, 13A or 16A
  • Selected charging current stays stored in internal memory even when disconnected from the socket (power) 
  • Max. Charging Power: 3.7 kW
  • Rated Voltage: 230V (single phase)
  • Operating voltage range: from 180V to 270V (50/60Hz)
  • Micro EVSE 1 inside EV plug – in-house developed FULL feature vehicle communication module
  • Ultra accurate and temperature independent QUARTZ controlled EV communication frequency  
  • User info via Blue LED light
  • Detects/indicates ALL normal charging states (via Blue LED)
  • Detects/indicates ALL faults (via Blue LED)
  • Auto recovers from any possible fault !!!
  • Length: 6m
  • Operating Ambient Air Temperature Range: -30 °C to +40 °C (at full sun exposure)
  • Optional over-temperature protection with SOFT-OFF capability and automatic reset
  • IP Rating: IP54 (rain water resistant)
  • Cable Color: Orange
  • Packed in durable carrier case
  • 100% compatible with all electric vehicles that have Type 1 sockets (For example: Nissan  Leaf, Kia Soul, Citroen C-zero, Peugeot Ion, Opel Ampera, Renault  Kangoo Z.E. (2011), Renault Fluence Z.E., Ford Focus EV, Mitsubishi  i-MiEV, Fisker Karma, Mitsubishi Outlander PHEV, Toyota Prius Plug-in,  Nissan e-NV200 and many others)
  • IEC 61851 compliant
  • CE approved


Optional features:

  • SCHUKO plug (Type F) with integrated OVER-TEMPERATURE PROTECTION
    • Ensures SAFE charging with high currents (16A)
    • Works totally independent
    • Terminates charging in case it gets too hot
    • Over-temperature is indicated via blue LED light
    • Automatically resumes charging when it cools down !!! 
    • How it works: in case of bad quality wall socket that causes  excessive heat generation this Schuko plug is able to detect that and  disconnect charging. Then the LED light is turned ON. When everything  cools down charging is automatically resumed. LED light is turned OFF.
  • Ground fault protection device – 30mA RCD (shall be used if there is no 30mA RCD protection behind the wall socket/in-house electrical installation)

NOTE: if  you have opted for the product without RCD installed, the use of this  portable EV charger is allowed exclusively on the installations  protected by RCD

METRON charging station Type 1 Schuko 16A 1ph 6m with case

English : Po odoslaní formuláru Vám príde potvrdzujúci e-mail na Vašu e-mailovú adresu, ktorú ste vyplnil vo formulári. Vašu žiadosť sa budeme snažiť vybaviť v čo možno najkratšom čase. Spravidla odpovedáme na každú žiadosť do 24 hodín od jej odoslania. Tovar doručujeme do 14 pracovných dní.